Crussis scooterbike ONE Cobra 4.4

399 EUR

one_cobra_4.4_1
IMG_0659.jpg
cobra(8).jpg
DSCF8778-2
DSCF8803
ikona play
YouTube placeholder

Why you'll love it

The ultimate CRUSSIS product for 2021, an aluminium scooter weighs 7,635 kg and costs under ten thousand crowns. This is the CRUSSIS COBRA - the lightest scooter with a 26×20" wheel ratio on the market. A scooter made (not only) for trips of all kinds. WHY AN ALUMINIUM FRAME AND NOT A STEEL ONE?
Nahoru
one_cobra_4.4_1
Crussis scooterbike ONE Cobra 4.4
399 EUR

Components

Cobra Scooter Frame

Cobra Scooter Frame

The new aluminium frame of the Cobra scooter with its specific and innovative design has been developed with the highest attention to the functionality of the scooter.

The conical shape of the head tube together with the optimally shaped triangular neck profile increases the frame's strength.

Ground clearance adjustment

Ground clearance adjustment

Thanks to the use of two levels on the rear fork, you can choose between a higher and lower footboard position and therefore choose the optimal ground clearance for the terrain you are going to ride. For riding on smooth surfaces it is ideal to choose a lower ground clearance (45 mm) and for off-road riding a higher ground clearance (65 mm). Lowering the ground clearance makes riding a scooter less physically demanding, as the standing leg is less bent on the rebound and you "squat" less when riding. That's the point!

Cobra Scooters Tyres

Cobra Scooters Tyres

Schwalbe Marathon Racer tyres - great trekking tyres made from SpeedGrip, a natural rubber compound that allows the tyre to be inflated up to 6 bar. Thanks to the material used and the high pressure, extremely low rolling resistance and excellent traction are ensured. The tyres are suitable for road and light off-road, field or forest paths. The tyres are also protected against punctures by a double layer of RaceGuard nylon fabric. A reflective stripe that lights up when the spotlight shines around the entire circumference of the tyre helps to increase the rider's passive safety in lower visibility.
Footboard

Footboard

The uniquely designed footboard forms a single unit with the rear fork; all made from a single piece of bent profile. It is not only a unique design element, but above all a design solution that eliminates the typical fatigue fractures in scooters where the rear fork is usually welded to the footpeg.

By moving the footpeg as close to the rear wheel as possible, we have achieved a shortening of the rear fork and increased the strength of the frame while maintaining a subtle appearance. The result is a more compliant frame that contributes to better filtration of smaller bumps and eliminates uncomfortable rear wheel bounce in corners.

The raised toe of the footpeg ensures optimum scooter tracking through the terrain; preventing the footpeg from "digging" into an obstacle (terrain wave, curb, etc.) and possibly falling off.

Technical specifications

Rm Ikona plus Ikona minus

frame

Alu 6061

Forks

CRUSSIS fixed, Alu

Kola Ikona plus Ikona minus

Brakes

TEKTRO V-brake with integrated bell

Riffs

CRUSSIS 26"/20", double walled, lined

Front tyre

SCHWALBE Marathon Racer Perf, RaceGuard 26x1.5 (40-559)

Rear tyre

SCHWALBE Marathon Racer Perf, RaceGuard 20x1.5 (40-406)

front hub

CRUSSIS with industrial bearings 100 mm, 24D

rear hub

CRUSSIS with industrial bearings 65 mm, 24D

Wheel diameter

Front 26"/rear 20"

Nosnost Ikona plus Ikona minus

weight

7,635 kg

load capacity

120 kg

Komponenty Ikona plus Ikona minus

handlebars

CRUSSIS Al MTB, 620 mm

stem

CRUSSIS Al, 31,8/100 mm

grips

CRUSSIS, 100% silicone

head composition

Ahead 1 1/8"

Rozmry Ikona plus Ikona minus

Height

890 - 930 mm

Length

1707 mm

Ground clearance

45 / 65 mm

Footprint length

423 mm

Wheelbase

1146 mm

Selected products for comparison
0/5