Specific and innovative design developed with the highest attention to the functionality of the scooter.
The conical shape of the head tube together with the optimally shaped triangular neck profile increases the frame's strength.
Thanks to the use of two levels on the rear fork, you can choose between a higher and lower footboard position and therefore choose the optimal ground clearance for the terrain you are going to ride.
For riding on smooth surfaces it is ideal to choose a lower ground clearance (45 mm) and for off-road riding a higher ground clearance (65 mm).
Lowering the ground clearance makes riding a scooter less physically demanding, as the standing leg is less bent on the rebound and you "squat" less when riding. That's the point!
Great trekking tires made from SpeedGrip, a natural rubber compound that allows the tyre to be inflated up to 6 bar. Thanks to the material used and the high pressure, extremely low rolling resistance and excellent traction are ensured.
The tires are suitable for road and light off-road, field or forest paths. The tyres are also protected against punctures by a double layer of RaceGuard nylon fabric.
A reflective stripe that lights up when the spotlight shines around the entire circumference of the tyre helps to increase the rider's passive safety in lower visibility.
The uniquely designed footplate is not only a nice design element, but above all a design solution that eliminates the typical fatigue cracks in scooters where the rear fork is usually welded to the footboard.
By keeping a continuous 102mm footboard width along its entire length, including the rear fork, which, along with 65 mm rear hub, minimizes the scooterist's hated ankle kick on rebound.
The raised toe of the footboard ensures optimum scooter handling through the terrain; preventing the footboard from "digging" into an obstacle (terrain wave, curb, etc.) and potentially falling off
CRUSSIS fixed, Alu
Front 26"/rear 20"
TEKTRO V-brake with integrated bell
CRUSSIS 26"/20", double walled, lined
SCHWALBE Marathon Racer Perf, RaceGuard 26x1.5 (40-559)
SCHWALBE Marathon Racer Perf, RaceGuard 20x1.5 (40-406)
CRUSSIS with industrial bearings 100 mm, 24D
CRUSSIS with industrial bearings 65 mm, 24D
Front 26"/rear 20"
CRUSSIS Al MTB, 620 mm
CRUSSIS Al, 31,8/100 mm
CRUSSIS, 100% silicone
Ahead 1 1/8"
890 - 930 mm
45 / 65 mm
road **** / terrain *** / city ***
For body height
140 - 190 cm